whatsapp

Cement-based adhesive
Home Page / Cement-based adhesive

Cement-based adhesive

"PALITRO" FACADE CERAMIC TILE ADHESIVE

Main composition:

Mixing agent:

Durability:

Dry residue:

Consumption: 4-5 kg/m2

Drying time:

Brightness:

Shelf life: 1 year

Packaging: 25 kg bags made of 2 or 3 layers of kraft paper and 1 layer of polyethylene

Manufacturer: "Evro Construction" LLC

Operating temperature: +5°C to +30°C

Water-dry mixture ratio:

Density:

Specific feature:

Structure of matter:

Combustion-ignition rate:

Acid-alkaline coefficient:

Appearance:

Volume:

Specific weight:

Dry sediment:

Theoretical form of spending:

Temperature:

Minimum temperature:

Maximum temperature:

Maximum relative humidity:

Ideal atmosphere:

Adhesion resistance: >0.5 N/mm2.

Slip resistance: <0.5 mm

Waiting time after mixing: 3-5 minutes

Intermediate filling time: 48 hours

Bending resistance limit:

Compressive strength limit:

Usage thickness:

Hardening:

Second layer hardening:

It is a cement-based, "NANO" technology, combination polymerized, one-component, gray ceramic adhesive.Specific features:It is easy to prepare and apply, there is no possibility of slipping on vertical surfaces, it is possible to glue ceramic and other facing tiles from top to bottom. It is resistant to frost and heat. Areas of use: It is used in interior and exterior spaces, for gluing facing materials on surfaces such as concrete, plaster, floor plaster, and for gluing tiles on top of tiles without removing old tiles. Method of use: Carefully empty 25 kg of the powder mixture into 6.0-6.5 liters of water and mix until the bubbles disappear. Wait 3-5 minutes for the mixture to settle, stir again before starting to use. Spread the mixture on the surface in a thin layer with the flat side of the trowel. Then, with the notched side of the trowel, comb the mixture applied to the surface to the size of the tile. When gluing large-sized tiles, it is recommended to use the combined gluing method (with this method, the adhesive is both applied to the surface and combed, and the facing is placed behind the tile and glued to the combed surface). The prepared mixture should be used within 3 hours.It is not recommended to use expired or coated mixture.Intermediate filling should be done after 24 hours on the wall and 48 hours on the floor. Storage conditions: Can be stored for 12 months in unopened bags, in dry conditions, on wooden pallets, with a maximum of 10 bags on top of each other.
menuitem

About us

menuitem

Products

menuitem

Innovations

menuitem menuitem

Areas of application

menuitem

Contact