"PALITRO" ACRYLIC EXTERIOR PAINT

Water-based paint
Home Page / Water-based paint

Water-based paint

"PALITRO" ACRYLIC EXTERIOR PAINT

Make an order

Main composition: Acrylic copolymer

Mixing agent: Water.

Durability: 40+/-10 KU.

Dry residue: %68+/-1.

Consumption: 9-11 m*m/lt or 150-175 gr/m*m.

Drying time: surface drying 1-2 hours, hardening 24 s.

Brightness: 7 +/-1

Shelf life: 2 years

Packaging: 3.5 kg, 10 kg, 25 kg

Manufacturer: "Evro Construction" LLC.

Operating temperature:

Water-dry mixture ratio:

Density: 1.63+/-0.01 g/ml.

Specific feature:

Structure of matter:

Combustion-ignition rate:

Acid-alkaline coefficient:

Appearance:

Volume:

Specific weight:

Dry sediment:

Theoretical form of spending:

Temperature:

Minimum temperature:

Maximum temperature:

Maximum relative humidity:

Ideal atmosphere:

Adhesion resistance:

Slip resistance:

Waiting time after mixing:

Intermediate filling time:

Bending resistance limit:

Compressive strength limit:

Usage thickness:

Hardening:

Second layer hardening:

Acrylic copolymer emulsion-based exterior wall paint with matte appearance.

Specific features:
It adheres perfectly to the surface on which it is used and does not crack or flake. It is resistant to all kinds of weather conditions, such as rain, moisture, sunlight, as well as the negative effects of salty moisture on the sea coast. With its ability to breathe, it expels moisture from the wall. Color does not fade..
Areas of use:
It is used on exterior parts of buildings, on concrete, plaster, brick and other old and new surfaces.

Method of use:
Before starting to use "Palitro Acryl", the surface must be completely free of adhesion-inhibiting substances such as oil, dust and sand.

Wait 21 days (at 20°C) on newly plastered surfaces. Before painting the surface, it is necessary to prime it with a binder so that the paint sticks to the surface more firmly and the paint consumption is less.

If necessary, gaps and cracks in the surfaces should be filled with a special repair mixture. In the first layer of use 10-12%, in the second layer 5-8% is diluted with water and applied twice with a brush and roller. Wait 1 hour between coats. During use, the temperature should be above +5°C, and the humidity should be below 80%.