"PALETRO" INTERMEDIATE FILLING MIXTURE

Cement-based adhesive
Home Page / Cement-based adhesive

Cement-based adhesive

"PALETRO" INTERMEDIATE FILLING MIXTURE

Make an order

Main composition:

Mixing agent:

Durability:

Dry residue:

Consumption: Varies according to the size of the spaces

Drying time:

Brightness:

Shelf life: 1 year

Packaging: in 20, 10, 1 kg bags consisting of 2 or 3 layers of kraft paper and 1 layer of polyethylene

Manufacturer:

Operating temperature: +5°C to +30°C.

Water-dry mixture ratio: +5°C - +30°C 5.0-5.5 I water / 20 kg dry mix.

Density:

Specific feature:

Structure of matter:

Combustion-ignition rate:

Acid-alkaline coefficient:

Appearance:

Volume:

Specific weight:

Dry sediment:

Theoretical form of spending:

Temperature:

Minimum temperature:

Maximum temperature:

Maximum relative humidity:

Ideal atmosphere:

Adhesion resistance:

Slip resistance:

Waiting time after mixing: 3-5 min

Intermediate filling time: after 24 hours on the wall, 48 hours on the floor.

Bending resistance limit: 5 N/mm2.

Compressive strength limit: 17 N/mm2.

Usage thickness:

Hardening:

Second layer hardening:

It is a cement-based intermediate filling mixture.. Specific features: Due to the rich additives in its composition, it is resistant to cracking, waterproof, does not fade and creates a smooth surface. It is produced according to the catalog and according to the order in any color. Areas of use:It is used to fill the 1-6 mm intervals of facing materials such as granite, various sizes of ceramics, cotto, limestone, glass mosaic in interior and exterior spaces. It can also be used in areas where there are sudden temperature changes, on the floors of areas with heavy pedestrian and car traffic. Method of use: Carefully empty 20/5/1 kg of dry mixture into 7/1.75/0.35 liters of water, respectively, and mix until bubbles disappear (it is recommended to use a low-speed mixer for mixing). Wait 3-5 minutes for the mixture to settle, stir again before starting to use. When mixing, pay attention to the water ratio, do not use straight. If you use it harshly, it can cause cracks, slumps, easy wear, dusting and discoloration. Fill the gaps with a rubber trowel and scrape off the excess. After 20-30 minutes, clean the surface with a damp sponge. After the surface is dry, clean and shine with a dry cloth. The prepared mixture should be used within 2 hours. Expired mixture should be discarded. The walls, where the intermediate filling work is performed, can be used after 24 hours, and the floors after 48 hours. All tools and equipment should be cleaned with water after use.