Packaging: 20 kg bags of 2 or 3 kraft paper and 1 thick polyethylene.
Manufacturer: "Evro Construction" LLC.
Operating temperature: +5°C to +30°C
Water-dry mixture ratio: 6.0-6.5 liters of water/25 kg of dry mixture 2.4-2.6 liters of water/10 kg of dry mixture.
Density:
Specific feature:
Structure of matter:
Combustion-ignition rate:
Acid-alkaline coefficient:
Appearance:
Volume:
Specific weight:
Dry sediment:
Theoretical form of spending:
Temperature:
Minimum temperature:
Maximum temperature:
Maximum relative humidity:
Ideal atmosphere:
Adhesion resistance:
Slip resistance:
Waiting time after mixing:
Intermediate filling time: after 24 hours on the wall, 48 hours on the floor
Bending resistance limit:
Compressive strength limit:
Usage thickness:
Hardening:
Second layer hardening: after the last 60-90 minutes
It is a cement-based, high-quality, rich in additives that increase the possibilities of product use, "NANO" technology, one-component, white ceramic. Areas of use:. This is a ceramic adhesive is used on surfaces such as : In internal and external spaces; In gluing glass mosaics; In filling the intervals; In gluing tiles over tiles without tearing off glass blocks and old tiles; In concrete, plaster, floor plaster. Surface Preparation: Ensure that the surfaces used are undamaged, dry, clean and of correct dimensions and that the surface is completely free of oil and paraffin residues that will weaken adhesion resistance.If there are cracks or gaps 5-6 mm deep on the surface, they should be filled with repair mixture produced according to the standards the day before. Before use, the surface must be primed with BIDER primer or other similar product manufactured according to standards. Preparation of the mixture: empty 25 kg of the powdered mixture into 6.0-6.5 liters of water and mix until the bubbles disappear. Wait 3-5 minutes for the mixture to settle, stir again before starting to use. Application: Spread the mixture on the surface in a thin layer with the flat side of the trowel. Then, according to the size of the tiles, comb the mixture applied to the surface with the comb side of the trowel. Determine the duration of adhesion of the plate to the mixture drawn on the surface by slightly touching (pressing) the mixture with your finger. If the mixture sticks to the finger, then the tiles can be glued to the surface. This period should not be more than 30 minutes. Otherwise, if the mixture applied to the surface closes, then it should be scraped off and the tiles should be glued after applying the mixture again on the same surface and combing it with a trowel. Storage conditions:Can be stored for 12 months in unopened bags, in dry conditions, on wooden pallets, with a maximum of 10 bags on top of each other.
