"PALITRO" PLUS INTERIOR SURFACE PAINT

Water-based paint
Home Page / Water-based paint

Water-based paint

"PALITRO" PLUS INTERIOR SURFACE PAINT

Make an order

Main composition: Acrylic copolymer

Mixing agent: water

Durability: 140+/-10 KU.

Dry residue: %70+/-1

Consumption: 11-13 m*m/lt or 125-150 gr/m*m

Drying time: surface drying 1-2 hours, hardening 24 s

Brightness: 7 +/-1

Shelf life: 2 years

Packaging: 3.5 kg, 10 kg, 25 kg

Manufacturer: "Evro Construction" LLC

Operating temperature:

Water-dry mixture ratio:

Density: 1.64+/-0.01 g/ml

Specific feature:

Structure of matter:

Combustion-ignition rate:

Acid-alkaline coefficient:

Appearance:

Volume:

Specific weight:

Dry sediment:

Theoretical form of spending:

Temperature:

Minimum temperature:

Maximum temperature:

Maximum relative humidity:

Ideal atmosphere:

Adhesion resistance:

Slip resistance:

Waiting time after mixing:

Intermediate filling time:

Bending resistance limit:

Compressive strength limit:

Usage thickness:

Hardening:

Second layer hardening:

It is a washable, acrylic co polymer emulsion-based decorative interior surface paint with a matte appearance.

Specific features:
It adheres perfectly to the surface on which it is used and does not crack or flake. It creates an elastic layer on the surface where it is applied and gives a perfect matte appearance. With its ability to breathe, it expels moisture from the wall. The color does not fade.

Areas of use:
It is used in the interior of buildings, on concrete, plaster, brick and other old and new surfaces.

Method of use:

Before starting to use "Palitro Plus", the surface must be completely free of adhesion-inhibiting substances such as oil, dust and sand. Wait 21 days (at 20°C) on newly plastered surfaces.
Before painting the surface, it is necessary to prime it with a binder so that the paint adheres to the surface more firmly and the paint consumption is less.
If necessary, the gaps and cracks on the surfaces should be filled with a special repair mixture.
In the first layer of use 10-12%, in the second layer 5-8% is diluted with water and applied in 2 layers with a brush and a roller.
Wait 1 hour between coats. During use, the temperature should not be higher than +5°C, and the humidity should not be lower than 80%